Bauder GRP Trims

GPR trim and GPR water check trim

Bauder GRP Trim & Bauder GRP Watercheck Trim are made from glass reinforced plastic. GRP has a far lower coefficient of thermal expansion than aluminum or steel meaning less movement at the joints, along with a higher strength to weight ratio.

Bauder GRP trims are to be used at roof edges in conjunction with Bauder bituminous roof systems. The GRP trim is available in a colour choice of black or grey and a range of profiles to suit the requirements of most projects. The GRP Watercheck Trim is only available in black and one profile size. The Watercheck Trim can also be used with Liquid applied membranes.

This product does not require a Declaration of Conformity (DoC) or Declaration of Performance (DoP).

Technical data sheet

Product information

GRP Trim Product Range	Face Depth (mm)	Fixing Arm (mm)	Length (m)	Thickness (mm)	Colour
Type 1	44	50	2.5	2.5	Black
Type 2	44	90	2.5	2.5	Black
Type 3	70	65	2.5	2.5	Black
Type 4*	100	65	2.5	2.5	Black or Grey
Type 6*	150	75	2.5	2.5	Black or Grey
GRP Watercheck Trim	Face Depth (mm)	Fixing Arm (mm)	Length (m)	Thickness (mm)	Colour
Watercheck Trim*	80	65	3	2.5	Black

Internal jointing sleeves and 90° pre-formed angles are also available.

*All further technical information is stated on the data sheet.