Bauder Bitumen Compact Vertical Outlet DN 100

Vertical Outlet

A thermally insulated cast polyurethane rainwater outlet with vertical spigot giving thermal continuity. The outlet comes with a pre-attached bituminous flange to ensure waterproofing integrity between the outlet and membranes. The BRE Certified (report no. HPR357-303748) high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet body.

For use with Bauder bituminous waterproofing membranes when connecting to conventional gravity drainage systems. The DN70 is also used as part of Bauder’s blue roof system. The product is designed to be used in warm, cold, and inverted roof scenarios. The spigot is designed to fit standard 75mm (70DN) & 160mm (150DN) pipework.

This product does not require a Declaration of Conformity (DoC) or Declaration of Performance (DoP).

technical Data sheet

Product information

Characteristic	Unit	Value
Length of outlet including spigot	mm	210
Length of outlet	mm	135
Length of spigot	mm	75
Width of outlet opening	mm	146
Width of spigot (external)	mm	110
Width of spigot opening	mm	100
Width of outlet body	mm	250
Weight	mm	2.1
Flow rate performance	litres/sec	6.1*

*Flow rate performance data using a 35mm head of water (including leaf grille), based upon requirements of BS EN 12056:3:2000. Further flow rate performance data can be obtained within this document. For bespoke drainage calculation performance data, please contact Bauder Limited.

All further technical information is stated on the data sheet.