Bauder Bitumen Refurbishment Outlet DN 125
Outlet
A thermally insulated cast polyurethane rainwater outlet with vertical spigot giving thermal continuity. The outlet comes with a pre-attached bituminous flange to ensure waterproofing integrity between the outlet and membranes. Outlet has a flow rate of 6.0 litres/sec based upon requirements of BS EN 12056:3:2000.
For use with Bauder bituminous waterproofing membranes when connecting into conventional gravity drainage systems. The product is designed to be used in cold roof and existing un-insulated roof scenarios. The spigot when fitted into an existing outlet using the ‘push fit’ seal, will accommodate internal diameters ranging from 134 to 168mm. There are two flexible seals supplied with the outlet. The smaller seal (lip seal) to fit pipework 134 to 144mm and the larger seal (profiled seal) to fit pipework 140 to 168mm. There is no reason to use both seals, so discard the seal that is not required.
This product does not require a Declaration of Conformity (DoC) or Declaration of Performance (DoP).
technical Data sheet