LiquiTEC Balcony and Walkway System
When to specify...
The Bauder LiquiTEC Balcony and Walkway System was developed to provide the optimum combination of aesthetic and functional requirements; designed to be slip resistant and hard wearing they can also be used for stairs and stairwells.
Cold application and exceptionally fast cure times are a distinct advantage when carrying out work on areas continuously in use by the building's occupants, inconvenience is kept to a minimum.
The system is suitable for application over almost all structural substrates commonly used for balcony and walkway construction and in refurbishment can be applied directly to asphalt and most other waterproofing and surfacing products typically found on existing structures. This avoids the unnecessary expense, risk and disruption of removing existing waterproofing and minimises installation time on site.
Key features
■□ Standards: ENV1187.
■□ BBA stated life expectancy in excess of 15 years.
■□ All system elements are totally cold applied.
■□ Thick layer system.
■□ Fully bonded with excellent interlayer adhesion.
■□ Products are solvent, isocyanate and halogen free.
■□ High performance fire retardant prevents spread of flame.
■□ Fire classification BROOF (t4) for LiquiBALKON warm roof system combinations stated and verified by the
BBA as ‘unrestricted’ and suitable for use on roof terraces over occupied areas. An unreinforced balcony system
with LiquiPAVE RF has been tested to EN ISO 11925-2 and satisfied the riteria for Euroclass Bfl-S1 according to
en 13501-1.
Benefits
■□ Cost savings through quick installation times.
■□ Tough and durable enough to withstand all types of balcony traffic.
■□ Exceptionally fast curing.
■□ Choice of two surface finishes.
■□ Avoids inherent risks associated with hot works.
■□ Minimal impact on the environment.
■□ Installation possible at very low temperatures.
■□ Withstands ponding water.
■□ Short trafficking times.
■□ Can be overlaid or repaired as required at any time in the future.
■□ Compatible with a wide range of substrates.
■□ Seamless with no joints or fixings.
Colours
Bauder LiquiTEC Balcony and Walkway System is available in these colours as standard:
.gif?width=780&ext=.jpg)
Stone Grey Blue Grey Traffic Grey
Approvals, certification and guarantee
■□ Comprehensive range of guarantees for this system.
■□ BBA Certificate number
14/5152 LiquiTEC Balcony, Walkway, Roof and Terrace System.
■□ Our LiquiTEC Warm Roof System and LiquiBALKON system hold ENV1187 fire classification BROOF (t4)
and are verified by the BBA as ‘unrestricted’ and suitable for use on any part of a roof or terrace. An unreinforced
balcony system with LiquiPAVE RF has been tested to EN ISO 11925-2 and 9239-1 and satisfied the criteria for
Euroclass Bfl-S1 according to EN 13501-1.
■□ Bauder LiquiTEC meets FLL guidelines, which is the benchmark test for root resistance in Europe.
View certifications here ►
Environmental credentials
■□ Manufactured under ISO 14001 Environmental Management System.
■□ All cold applied liquid products are solvent, isocyanate and halogen free.
■□ BRE Green Guide ‘A+’ generic rating, element number 1212530006 when used with warm roof insulation on
a profiled steel deck with steel supports.
■□ BRE Green Guide ‘C’ generic rating, element number 1212530060 when used with pre-cast concrete hollow
slab with screed, inverted insulation with pebble ballast.
■□ EDP certification for LiquiTEC products: EPD-DBC-20190116-IBE1-EN.
■□ EDP certification for PU insulation - aluminium facing: EPD-DBC-20190116-IBE1-EN.
■□ Insulation within a Warm Roof Construction: the BauderPIR insulation used within the warm roof construction of
a cold applied waterproofing system has extremely high thermal efficiency and is CFC and HCFC free. It has zero ODP
and a Global Warming Potential of less than 5Kg CO2 - Eq/Kg. As part of our PIR insulation manufacturing process,
offcuts and waste are readily recycled and used in the production of hand cleansers and decking materials. The
embodied energy of our rigid polyurethane PIR insulation accounts for as little as 4% of the energy the board can
save during its serviceable life. With buildings accounting for 50% of the energy consumption in Europe, the inclusion
of insulation when installing new or refurbished roofs plays a significant part in reducing CO2 emissions.
Read more about sustainability at Bauder ►
Installation and maintenance
The quality and experience of the installing operative is paramount to ensuring a successful project. Bauder Approved Contractors are the only people fully trained and certified to install our products. They provide the necessary experience that our exceptional guarantee demands.
Go to approved contractor information ►
Go to maintenance advice ►
Downloads
Contact us today about your project
Each project is unique in its requirements, but we have case studies and examples of our work available for you to look at. If you are looking for a cold applied liquid roof system, then get in touch with our team to discuss your project’s individual needs.